Filter
Top Products
AVERage Subsystem
2–14
TVS600 & TVS600A Command Reference
AVERage
AVERage?
Sets or queries whether the waveform analyzer performs averaging during
acquisition. When the setting is off, the aquisition mode is normal; when on, the
acquisition mode is either average, envelope or peak detect, depending on the
setting for AVERage:TYPE (see page 2–16). The AVERage setting affects all
channels. When averaging is on, the values returned from [SENSe:]DATA? are
averaged, enveloped or peak-detected. The raw, unaveraged data is not available.
[SENSe:]AVERage[:STATe] <boolean>
[SENSe:]AVERage[:STATe]?
<boolean> Query response
<NRf>
N ≠ 0 or ON
0 or OFF
<NF1>
1
0
0
None
Enabling averaging sets AADVance to OFF.
Command: AVER ON
Query: AVER?
Response: 1
AVERage:COUNt
AVERage:TYPE
AADVance
Syntax
Parameters
Reset Value
Errors and Events
Dependencies
Examples
Related Commands