Filter
Top Products
TVS600 & TVS600A Command Reference
2–303
VOLTage Subsystem
This section describes each command and query in the [SENSe:]VOLTage
subsystem. Figure 2–33 shows the command tree for the VOLTage subsystem.
Figure 2–34 shows the part of the waveform analyzer controlled by the VOLTage
commands. The input channel number, defined at the probe connector, is shared
as the parameter <n> for the INPut<n> and VOLTage<n> commands. Only the
four channel TVS641A and TVS645A will accept VOLTage3 and VOLTage4
commands.
VOLTage[1] | VOLTage2
[:DC]
:PTPeak:OFFSet
[SENSe:]
:LOWer[:UPPer]
:RANGe
Figure 2–33: VOLTage subsystem hierarchy
:FUNCtion
:DATA
:AVERage
:AADVance
:SWEep
:ROSCillator
INPut[1]
SENSe
INPut2
CH 1
CH 2
:VOLTage[1]
:VOLTage2
Figure 2–34: VOLTage subsystem functional model