Filter
Top Products
SYSTem Subsystem
2–190
TVS600 & TVS600A Command Reference
SYSTem:COMMunicate:SERial:BAUD
SYSTem:COMMunicate:SERial:BAUD?
Sets or queries the baud rate of the front panel RS-232 port. The baud rate is the
data transfer rate in bits per second for a serial transfer. Both transmit and receive
baud rates are set by this command. Refer to the TVS600 & TVS600A Series
Waveform Analyzers User Manual for the factory setting.
When you set :SERial:BAUD, the new value is stored in nonvolatile RAM and
is recalled at power up. However, the baud rate is not saved with stored settings
(*LRN) and it is not reset to a default value by *RST.
SYSTem:COMMunicate:SERial:BAUD <baud_rate>
SYSTem:COMMunicate:SERial:BAUD?
<baud_rate> Query response
<NRf>
300
600
1200
2400
4800
9600
19200
38400
1
57600
1
MINimum
MAXimum
<NR1>
300
600
1200
2400
4800
9600
19200
38400
1
57600
1
300
19200 (57600
1
)
1
TVS600A only
Not applicable
Execution Error –222, “Data out of range”
Attempted to set the baud rate to an illegal value.
None
Command: SYST:COMM:SER:BAUD 4800
Query: SYST:COMM:SER:BAUD?
Response: 4800
Syntax
Parameters
Reset Value
Errors and Events
Dependencies
Examples