Filter
Top Products
SYSTem Subsystem
TVS600 & TVS600A Command Reference
2–187
Execution Error –221, “Settings conflict”
Attempted to autoset a channel that is not turned on.
Execution Error –241, “Hardware missing”
Attempted to autoset INTernal3 or INTernal4 when the instrument is configured
with only two channels.
Trigger level may be affected.
Command: SYST:AUT:VOLT CHAN1
VOLTage:RANGe:UPPer
VOLTage:RANGe:LOWer
SYSTem:AUToset:SWEep
SYSTem:AUToset:TRIGger
Dependencies
Examples
Related Commands