Filter
Top Products
CALCulate Subsystem
2–28
TVS600 & TVS600A Command Reference
<sense_func> (CALC block source) Query response
<string>
“XTIMe:VOLTage[:DC] 1” or CHAN1
“XTIMe:VOLTage[:DC] 2” or CHAN2
“XTIMe:VOLTage[:DC] 3” or CHAN3
“XTIMe:VOLTage[:DC] 4” or CHAN4
“REFerence1” or REF1
“REFerence2” or REF2
...
“REFerence10” or REF10
“ ” or NONE
<string>
“XTIM:VOLT 1”
“XTIM:VOLT 2”
“XTIM:VOLT 3”
“XTIM:VOLT 4”
“REF1”
“REF2”
...
“REF10”
“ ”
" (None)
Execution Error –141, “CALC1:FEED FTM”
Attempted to set FEED1 to an invalid trace name.
Execution Error –224, “Illegal parameter value, invalid sense function”
Attempted to set FEED1 to an invalid sense function.
Execution Error –241, “Hardware missing”
Attempted to set feed to “XTIM:VOLT 3” or “XTIM:VOLT 4” when the
instrument is configured with two channels.
None
Command: CALC1:FEED1 XTIM:VOLT 1"
Query: CALC1:FEED1?
Response: "XTIM:VOLT 1"
CALCulate:PATH
CALCulate:FEED2
CALCulate:FEED2?
Sets or queries a second source of data for the specified CALCulate block. The
second source is used when measurements that are based on two waveforms,
such as gain, phase, and delay, are specified using the CALCulate:WMList
command.
Reset Value
Errors and Events
Dependencies
Examples
Related Commands