Filter
Top Products
Command Syntax
1–6
TVS600 & TVS600A Command Reference
H You can use upper case, lower case, or a mixture of both cases for all
commands, queries, and parameters.
OUTPUT1:TTLTRG:POLARITY INVERTED
is the same as
output1:ttltrg:polarity inverted
and
OUTPUT1:ttltrg:polarity INVERTED
H No embedded spaces are allowed between or within nodes.
correct: OUTPUT1:TTLTRG:POLARITY INVERTED
incorrect: OUTPUT1: TTLTRG: POLARITY INV ERTED
IEEE 488.2 Common Commands
ANSI/IEEE Standard 488.2 defines the codes, formats, protocols, and usage of
common commands and queries used on the interface between the controller and
the instruments. The waveform analyzer complies with this standard.
The syntax for an IEEE 488.2 common command is an asterisk (*) followed by a
command and, optionally, a space and parameter value. The syntax for an
IEEE 488.2 common query is an asterisk (*) followed by a query and a question
mark. All of the common commands and queries are listed in the last part of the
Syntax and Commands section. The following are examples of common
commands:
H *ESE 16
H *CLS
The following are examples of common queries:
H *ESR?
H *IDN?
Description
Command and Query
Structure