Filter
Top Products
TRIGger[:A] Subsystem
TVS600 & TVS600A Command Reference
2–237
TRIGger:FILTer:NREJect
TRIGger:FILTer:NREJect?
Sets or queries whether or not the noise reject filter is enabled. This filter
provides a means of rejecting noise on the trigger signal. Only one trigger filter
(i.e., LPAS, HPAS, or NREJ) may be enabled at a time. This command is
effective only when you set TRIGger:SOURce to INTernal.
TRIGger[:A]:FILTer:NREJect <boolean>
TRIGger[:A]:FILTer:NREJect?
<boolean> Query response
<NRf>
1 or ON
0 or OFF
<NR1>
1
0
0
none
When TRIGger:A:SOURce and TRIGger:B:SOURce use the same signal,
changing TRIG:FILT:NREJ also changes TRIG:B:FILT:NREJ.
Command: TRIG:FILT:NREJ ON
Query: TRIG:FILT:NREJ?
Response: 1
TRIGger:LEVel
Syntax
Parameters
Reset Value
Errors and Events
Dependencies
Examples
Related Commands