Filter
Top Products
OUTPut Subsystem
TVS600 & TVS600A Command Reference
2–143
OUTPut:REFerence
OUTPut:REFerence?
Sets or queries whether a reference signal is output on the front-panel connector
REFERENCE OUTPUT. The reference signal is intended for use during
instrument verification. You can direct either of two signals to the REFERENCE
OUTPUT: the internal 10 MHz reference clock with a 1 V peak-to-peak
amplitude or the 8.0 V DC level. Use OUTPut:REFerence:FUNCtion to select
which signal appears on the output. The reference signal is turned off when you
start an acquisition or reset the instrument.
OUTPut:REFerence[:STATe] <boolean>
OUTPut:REFerence[:STATe]?
<boolean> Query response
<NRf>
1 or ON
0 or OFF
<NR1>
1
0
0
None
None
Command: OUTP:REF ON
Query: OUTP:REF?
Response: 1
OUTPut:REFerence:FUNCtion
Syntax
Parameters
Reset Value
Errors and Events
Dependencies
Examples
Related Commands