Filter
Top Products
TRIGger:TRANsition Subsystem
2–298
TVS600 & TVS600A Command Reference
TRIGger:TRANsition:SLEW:SLOPe
TRIGger:TRANsition:SLEW:SLOPe?
TVS600A Models Only
Sets or queries the slope for SLEW transition triggering class.
:A is a predefined alias for :SEQuence[1].
This command only has effect when TRIGger:TYPE is TRANsition, and
TRIGger:TRANsition:CLASs is SLEW.
TRIGger[:A]:TRANsition:SLEW:SLOPe <slope>
TRIGger[:A]:TRANsition:SLEW:SLOPe?
<slope> Query response
NEGative
POSitive
NEG
POS
None
POS
Command Error –141, “Invalid character data”
Attempted to set slope to an illegal value.
None
Command: TRIG:TRAN:SLEW:SLOP NEG
Query: TRIG:TRAN:SLEW:SLOP?
Response: NEG
TRIGger:TYPE
TRIGger:TRANsition:CLASs
Syntax
Parameters
Suffix Units and
Multipliers
Reset Value
Errors and Events
Dependencies
Examples
Related Commands