Filter
Top Products
STATus Subsystem
TVS600 & TVS600A Command Reference
2–161
STATus:PRESet
Presets the SCPI Enable and Transition registers, and the Status Queue enable
registers. The Operation and Questionable Enable Registers are preset to zero (all
events disabled). Refer to the register command descriptions for the effects of
STATus:PRESet on specific registers. This command does not clear SCPI Status
registers or 488.2 enable and event registers. For an overview of the status and
event reporting system, refer to the TVS600 & TVS600A Series Waveform
Analyzers User Manual.
STATus:PRESet
None
Not applicable
None
None
Command: STAT:PRES
STATus:OPERation:ENABle
STATus:OPERation:NTRansition
STATus:OPERation:PTRansition
STATus:OPERation:QENable:NTRansition
STATus:OPERation:QENable:PTRansition
STATus:QUEStionable:ENABle
STATus:QUEStionable:NTRansition
STATus:QUEStionable:PTRansition
STATus:QUEStionable:QENable:NTRansition
STATus:QUEStionable:QENable:PTRansition
STATus:SESR:QENable
*CLS
STATus:QUEStionable? (Query Only)
Returns the contents of the Questionable Status Register as a decimal number.
The Questionable Status Register, defined in Table 2–3, identifies operations
whose results are questionable. Acquiring a waveform when the waveform
analyzer is in need of calibration can generate an event on bit 8. Use the
Syntax
Parameters
Reset Value
Errors and Events
Dependencies
Examples
Related Commands