Filter
Top Products
SYSTem Subsystem
TVS600 & TVS600A Command Reference
2–193
SYSTem:COMMunicate:SERial:ECHO
SYSTem:COMMunicate:SERial:ECHO?
Sets or queries whether incoming characters are echoed back to the front panel
RS-232 port. This mode is useful when you are typing commands at a connected
terminal because you can see what characters the instrument received. Refer to
the TVS600 & TVS600A Series Waveform Analyzers User Manual for the factory
setting.
When you set :SERial:ECHO, the new value is stored in nonvolatile RAM and is
recalled at power up. However, the echo mode is not saved with stored settings
(*LRN) and it is not reset to a default value by *RST.
SYSTem:COMMunicate:SERial:ECHO <boolean>
SYSTem:COMMunicate:SERial:ECHO?
<boolean> Query response
<NRf>
1 or ON
0 or OFF
<NR1>
1
0
Not applicable
None
None
Command: SYST:COMM:SER:ECHO OFF
Query: SYST:COMM:SER:ECHO?
Response: 0
SYSTem:COMMunicate:SERial:PRESet:RAW
SYSTem:COMMunicate:SERial:PRESet:TERMinal
SYSTem:COMMunicate:SERial:ERESponse
SYSTem:COMMunicate:SERial:ERESponse?
Sets or queries whether error messages are automatically returned to the front
panel RS-232 port. When OFF, error messages are stored in the RS-232 Error
Syntax
Parameters
Reset Value
Errors and Events
Dependencies
Examples
Related Commands