Filter
Top Products
TVS600 & TVS600A Command Reference
2–151
STATus Subsystem
This section describes the commands in the STATus subsystem. See Figure 2–20.
These commands, along with several IEEE 488.2 Common Commands, control
the status and event reporting system. The STATus subsystem provides a way to
determine the state of the waveform analyzer and control what events can
interrupt the system controller. For an overview of the status and event reporting
system, refer to the TVS600 & TVS600A Series Waveform Analyzers User
Manual.
STATus
:OPERation :QUEStionable
:PRESet
:SESR
Figure 2–20: STATus subsystem hierarchy