Filter
Top Products
TRIGger:PULSe Subsystem
2–274
TVS600 & TVS600A Command Reference
TRIGger:PULSe:SOURce
TRIGger:PULSe:SOURce?
Sets or queries the source of the trigger signal used for all pulse triggering. To
activate pulse triggering, you must set TRIGger:TYPE to PULSe.
Setting source to INTernal1 selects the signal from INPut1 and [SENSe:]VOLT-
age1 to be the trigger source. The defined alias for the SCPI trigger :SE-
Quence[1] is A.
TRIGger[:A]:PULSe:SOURce <source>
TRIGger[:A]:PULSe:SOURce?
<source> Query response
INTernal[1]
INTernal2
INTernal3
INTernal4
INT
INT2
INT3
INT4
INT
Execution Error –224, “Illegal parameter value”
Attempted to set source to an illegal value.
None
Command: TRIG:PULS:SOUR INT3
Query: TRIG:PULS:SOUR?
Response: INT3
TRIGger:TYPE
Syntax
Parameters
Reset Value
Errors and Events
Dependencies
Examples
Related Commands