Filter
Top Products
CALCulate Subsystem
2–48
TVS600 & TVS600A Command Reference
CALCulate:DERivative:STATe
CALCulate:PATH
CALCulate:PATH?
Sets or queries a list of CALCulate functions to execute in the order listed upon
completion of acquisition. You specify the :PATH as a list of functions separated
by commas. The CALCulate subsystem performs the calculations in sequential
order on the source you define with CALCulate:FEED. CALCulate:PATH
supports simple post-processing measurements. When a measurement cannot be
expressed in a simple linear fashion, use the command CALC:PATH:EXPRes-
sion.
Calculations based on the CALC:PATH command are based on the SCPI
calculation model. See the TVS600 & TVS600A Series Waveform Analyzers User
Manual for a description of the SCPI model.
CALCulate<n>:PATH <path>
CALCulate<n>:PATH?
<n>
1
Query response
1
2
3
4
Not applicable
1
The calculate block number <n> selects one of four calculate blocks. If you omit <n>,
the default is calculate block 1.
<path> (Calculate subblocks to execute) Query response
AAMList
DERivative
FILTer
FORMat
INTegral
SMOothing
TRANsform
1
WMList
AAML
DER
FILT
FORM
INT
SMO
TRAN
WML
1
TRANsform refers to the CALCulate:TRANsform:FREQuency commands.
AAML, SMO, DER, INT, FILT, TRAN, FORM, WML
Related Commands
Syntax
Parameters
Reset Value