Filter
Top Products
TRIGger:PULSe Subsystem
2–280
TVS600 & TVS600A Command Reference
TRIGger:PULSe:WIDTh:POLarity
TRIGger:PULSe:WIDTh:POLarity?
Sets or queries the polarity of the pulse used for pulse width triggering. Use the
command TRIGger:PULSe:WIDTh:QUALify to set whether the trigger event is
for pulses inside or outside the limits (LLIMit and HLIMit).
This command is active only when you set TRIGger:TYPE to PULSe and
TRIGger:PULSe:CLASs to WIDTh.
TRIGger[:A]:PULSe:WIDTh:POLarity <polarity>
TRIGger[:A]:PULSe:WIDTh:POLarity?
<polarity> Query response
NEGative
POSitive
NEG
POS
POS
Execution Error –224, “Illegal parameter value”
Attempted to set polarity to an illegal value.
None
Command: TRIG:PULS:WIDT:POL NEG
Query: TRIG:PULS:WIDT:POL?
Response: NEG
TRIGger:TYPE
TRIGger:PULSe:CLASs
Syntax
Parameters
Reset Value
Errors and Events
Dependencies
Examples
Related Commands