Filter
Top Products
TRIGger[:A] Subsystem
2–240
TVS600 & TVS600A Command Reference
0.0E+0
Execution Error –222, “Data out of range”
Attempted to set trigger level to an illegal value.
None
Command: TRIG:LEV 1
Query: TRIG:LEV?
Response: 1.0E+0
TRIGger:SOURce
VOLTage:RANGe:PTPeak
VOLTage:RANGe:OFFSet
TRIGger:METastable:STATe
TRIGger:METastable:STATe?
TVS600A Models Only
Sets or queries the state of metastable trigger rejection. Auto metastable rejection
looks at the instrument context at acquisition time and determines whether to
reject metastable triggers.
In Auto mode, metastable trigger rejection is enabled if averaging is on and
AVERage:TYPe is SCALar or ENVelope but not PEAKdetect, or if any calc
block contains AVER(), ENV(), or vector comparison functions.
TRIGger:[A]:METastable:STATe <parameter>
TRIGger:[A]:METastable:STATe?
<parameter> Query response
REJect
ACCept
AUTo
Not applicable
AUTo
Reset Value
Errors and Events
Dependencies
Examples
Related Commands
Syntax
Parameters
Suffix Units and
Multipliers
Reset Value