Filter
Top Products
TRIGger[:A] Subsystem
2–232
TVS600 & TVS600A Command Reference
TRIGger:FILTer:NREJect
TRIGger:SOURce
TRIGger:COUPling:<preset>
Sets trigger coupling and filtering with one command. It should not be used in
applications that must work on a variety of SCPI instruments. For a description
of how this command affects the four underlying SCPI commands, see Depen-
dencies on this page.
This command is effective only when you set TRIGger:SOURce to INTernal.
Note that the external trigger provides DC coupling only. There is no associated
query for this command.
TRIGger[:A]:COUPling:AC
TRIGger[:A]:COUPling:ACNReject
TRIGger[:A]:COUPling:DC
TRIGger[:A]:COUPling:DCNReject
TRIGger[:A]:COUPling:HFReject
TRIGger[:A]:COUPling:LFReject
None
Not applicable
None
The following table describes the interactions between TRIGger:COUPling:<pre-
set> and its four underlying SCPI commands.
<preset> COUPling FILT[:LPASs] FILT:HPAS FILT:NREJect
AC AC OFF OFF OFF
ACNReject AC OFF OFF ON
DC DC OFF OFF OFF
DCNReject DC OFF OFF ON
HFReject DC ON OFF OFF
LFReject AC OFF ON OFF
Syntax
Parameters
Reset Value
Errors and Events
Dependencies