Filter
Top Products
FORMat Subsystem
2–98
TVS600 & TVS600A Command Reference
FORMat:TRACe:AATS
FORMat:TRACe:AATS?
Sets or queries the type of data format used to transfer the timestamp trace
produced by Auto Advance acquisition. The format applies to transfer through
any word serial and RS232 external interfaces. The REAL type corresponds to a
Float type number in the C programming language. FDC tranfers are always in
binary format.
The number of significant digits returned by an ASCII data query is not
selectable. A setting of zero selects a format with a varying number of significant
digits depending on the value of the data point. Refer to the TVS600 & TVS600A
Series Waveform Analyzers User Manual for a definition of the data formats for
<type>.
FORMat[:DATA]:TRACe:AATS <type>[,<length>]
FORMat[:DATA]:TRACe:AATS?
<type>[,<length>] Query response
ASCii[,0]
REAL,32
ASC,0
REAL,32
ASC,0
Execution Error –141, “Invalid character data”
Attempted to set format to an illegal value.
None
Command: FORM:TRAC:AATS REAL,32
Query: FORM:TRAC:AATS?
Response: REAL,32
TRACe[:DATA]?
FORM:BORD
Syntax
Parameters
Reset Value
Errors and Events
Dependencies
Examples
Related Commands