Filter
Top Products
STATus Subsystem
2–168
TVS600 & TVS600A Command Reference
None
Command: STAT:QUES:QEN:NTR #H0100
Query: STAT:QUES:QEN:NTR?
Response: 256
STATus:QUEStionable?
STATus:QUEStionable:QENable:PTRansition
STATus:QUEStionable:CONDition?
STATus:PRESet
STATus:QUEStionable:QENable:PTRansition
STATus:QUEStionable:QENable:PTRansition?
Sets or queries the contents of the Positive Transition Queue Enable Register
(PTQER) for the Questionable Status Register. When you set an event bit
true (1) in the PTQER, the corresponding event the Questionable Status
Condition Register generates a message in the Status Queue when the event line
changes from false to true (0 to 1). The query returns the current setting as a
decimal number whose bits correspond to the Questionable Status Register bits.
Refer to Table 2–3 on page 2–162 for a definition of the events associated with
the Questionable Status Register bits. The command STATus:QUEStion-
able:QENable:NTRansition provides similar control for negative event transi-
tions. For an overview of the status and event reporting system, refer to the
TVS600 & TVS600A Series Waveform Analyzers User Manual.
STATus:PRESet sets all register bits to zero (0) which disables reporting positive
event transitions. Setting unused enable bits does not generate an error, they are
ignored.
STATus:QUEStionable:QENable:PTRansition <mask>
STATus:QUEStionable:QENable:PTRansition?
<mask> Query response
<NRf> | <Non-decimal numeric>
0 ≤ N ≤ #HFFFF
<NR1>
Not applicable
Dependencies
Examples
Related Commands
Syntax
Parameters
Reset Value