Filter
Top Products
SWEep Subsystem
2–174
TVS600 & TVS600A Command Reference
<offset_time>
1
Query response
<NRf>
MINimum
MAXimum
<NR3>
(SWEep:OREFerence:LOCation
SWEep:TIME) – (SWEep:TIME)
(SWEep:OREFerence:LOCation
SWEep:TIME)
1
The default multiplier for <offset_time> is S for seconds. You can also use the
multipliers MS for milliseconds, US for microseconds, NS for nanoseconds, and PS
for picoseconds.
0.0E+0
Execution Error –222, “Data out of range”
Attempted to set offset time to an illegal value.
Changing SWEep:OFFSet:TIME also changes SWEep:OFFSet:POINts as they
both control the parameter SWEep:OFFSet.
Command: SWE:OFFSet:TIME -100E-6
Query: SWE:OFFSet:TIME?
Response: -100.0E-6
SWEep:OREFerence:LOCation
SWEep:OFFSet:POINts
SWEep:TINTerval
SWEep:POINts
Parameters
Reset Value
Errors and Events
Dependencies
Examples
Related Commands