Filter
Top Products
Boot Loader
4-21
Memory and I/O Spaces
4.5.6 Boot Loader Program
*********************************************************************************
* TMS320C2xx Boot Loader Program *
* *
* This code sets up and executes boot loader code that loads program *
* code from location 8000h in external global data space and transfers it *
* to the destination address specified by the first word read from locations *
* 8000h and 8001h. *
*********************************************************************************
.length 60
GREG .set 5h ; The GREG Register
SRC .set 8000h ; Source address
DEST .set 60h ; Destination address
LENGTH .set 61h ; Code length
TEMP .set 62h ; Temporary storage
HBYTE .set 63h ; Temporary storage for upper half of 16–bit word
CODEWORD .set 64h ; Hold program code word
.sect ”bootload”
*
* Initialization
*
BOOT LDP #0 ; Set the data page to 0 (load DP with 0)
SPLK #2E00h,TEMP ; Set ARP = 1, OVM = 1, INTM = 1, DP = 0
LST #0,TEMP
SPLK #21FCh,TEMP ; Set ARB = 1, CNF = 0, SXM = 0, XF = 1, PM = 0
LST #1,TEMP
SPLK #80h,GREG ; Designate locations 8000–FFFFH as global data
; space
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* BOOT LOAD FROM 8–BIT MEMORY. MOST SIGNIFICANT BYTE IS FIRST *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
*
* Determine destination address
*
ADDR LAR AR1,#SRC ; AR1 points to global address 8000h
LACC *+,8 ; Load ACC with high byte shifted left by 8 bits
SACL HBYTE ; Store high byte
LACL *+ ; Load ACC with low byte of destination
AND #0FFH ; Mask off upper 24 bits.
OR HBYTE ; OR ACC with high byte to form 16-bit
; destination address
SACL DEST ; Store destination address
*
* Determine length of code to be transferred
*
LEN LACC *+,8 ; Load ACC with high byte shifted left by 8 bits
SACL HBYTE ; Store high byte
LACL *+ ; Load ACC with low byte of length
AND #0FFH ; Mask off upper 24 bits.
OR HBYTE ; OR ACC with high byte to form 16-bit length
SACL LENGTH ; Store length
LAR AR0,LENGTH ; Load AR0 with length to be used for BANZ