Filter
Top Products
Hardware Description
3-76 Copyright © 2003-2007 ARM Limited. All rights reserved. ARM DUI 0224F
3.14.2 Card insertion and removal
Insert the card into the socket with the contacts face down for the connector on the top
of the PB926EJ-S or face up for the bottom connector. Cards are normally labelled on
the top surface and provide an arrow to indicate the correct way to insert them.
Remove the card by gently pressing it into the socket. It springs back and can be
removed. This ensures that the card detection switches within the socket operate
correctly.
3.14.3 Card interface description
Figure 3-32 on page 3-77 shows the memory card interface.