Filter
Top Products
Getting Started
2-2 Copyright © 2003-2007 ARM Limited. All rights reserved. ARM DUI 0224F
2.1 Setting up the RealView Platform
The following items are supplied with the PB926EJ-S:
• the PB926EJ-S printed-circuit board mounted on a metal tray
• an AC power supply that provides a 12VDC output
• a CD containing sample programs, Boot Monitor code, FPGA and PLD images,
and additional documentation
• this user guide.
To set up the PB926EJ-S as a standalone development system:
1. Set the configuration switches to select the boot memory location, operating
frequency, and FPGA image. See Setting the configuration switches on page 2-3.
2. If you are using memory expansion boards, connect them to the PB926EJ-S. See
Appendix E Memory Expansion Boards.
3. If you are using an external display:
• For VGA displays, connect the cable from the display to the VGA
connector on the PB926EJ-S.
• For CLCD displays, connect the CLCD adaptor board cable to the
PB926EJ-S. See Appendix C CLCD Display and Adaptor Board.
4. If you are using expansion Logic Tiles, mount the tile on the tile expansion
connectors. See Appendix F RealView Logic Tile and the manual for your Logic
Tile.
5. If you are using a Trace Port Analyzer (TPA), connect the Trace Port interface
buffer board. See Connecting the Trace Port Analyzer on page 2-10.
6. If you are using a debugger, connect to the JTAG or USB debug port on the board.
See Connecting JTAG debugging equipment on page 2-8.
7. Apply power to the PB926EJ-S. See Supplying power on page 2-13.
8. If you are using the supplied Boot Monitor software to select and run an
application, see Using the PB926EJ-S Boot Monitor and platform library on
page 2-14
Note
If you are using the PB926EJ-S with the PCI backplane, see also Appendix D PCI
Backplane and Enclosure.