Filter
Top Products
CLCD Display and Adaptor Board
C-6 Copyright © 2003-2007 ARM Limited. All rights reserved. ARM DUI 0224F
C.2 Installing the CLCD display
To install the CLCD display:
1. Connect one end of the CLCD expansion cable to the CLCD adaptor board.
2. Connect the other end of the cable to the PB926EJ-S CLCD expansion connector
on the enclosure.
3. If required, program the CLCD control registers SYS_CLCD and
SYS_CLCDSER to sequence the power to the LCD display and specify the bit
format. See the CLCDC interface on page 3-61.
Figure C-5 CLCD adaptor board connection