Filter
Top Products
Signal Descriptions
ARM DUI 0224F Copyright © 2003-2007 ARM Limited. All rights reserved. A-11
Note
The R[7:0], G[7:0], and B[7:0] signals are digital CLCD signals. The digital signals
must be converted by the PLC and DAC to produce the R, G, and B analog signals used
on the VGA connector.
22 TSnSS 56 LCDID2
23 TSMISO 57 LCDID3
24 TSMOSI 58 LCDID4
25 LCDXWR 59 GND
26 LCDSD0 60 GND
27 LCDXRD 61 GND
28 LCDXCS 62 3V3
29 LCDDATnCOM 63 3V3
30 LCDSD0OUTnIN 64 5V
31 CLPOWER 65 5V
32 nLCDIOON 66 VLCD
33 PWR3V5VSWITCH 67 VLCD
34 VDDPOSSWITCH 68 VDDNEGSWITCH
Table A-6 CLCD Interface board connector J18 (continued)
Pin Signal Pin Signal