Filter
Top Products
Configuring the USB Debug Connection
G-8 Copyright © 2003-2007 ARM Limited. All rights reserved. ARM DUI 0224F
• If the PB926EJ-S is not detected, one of the errors shown in Figure G-5 or
Figure G-6 is displayed. If you see one of these errors, ensure that the USB
cable is properly attached.
Figure G-5 Error shown when no devices are detected
Figure G-6 Error shown when the USB debug port is not functioning
5. Right-click on VPB926EJ-S USB in the Connection Control window and select
Connection Properties from the context menu that appears. The Connection
Properties window is displayed as shown in Figure G-7.
Figure G-7 Connection Properties window
6. You can change connection properties by selecting controls in the Name column.