Filter
Top Products
MGC Manager User’s Guide - Volume I
4-55
Mute “Meet Me”
Parties
Select this option to automatically mute all undefined
(“Meet Me “) dial-in participants once they are
connected to the conference. The participants can
then be individually unmuted by the operator or the
conference chairperson.
Note: This option is enabled only for Audio Only
Meet-Me-Per-Conference, Meeting Rooms and
Entry Queue Access conferences and only if the
Audio+ card is installed in the MCU.
Start Conf.
Requires
Chairperson
Select this option to allow the conference to start
only when the participant defined as a chairperson
connects to the conference. Participants who
connect to the conference before the chairperson
are placed on Hold and hear background music (and
see a Welcome slide when available). Once the
conference is activated, the participants are
automatically connected to the conference.
When the check box is cleared, the conference
starts at its predefined time or when the first
participant connects to it (Meeting Rooms).
Note: This option is enabled only when an IVR
Service is assigned to the conference and the
Audio+ card is installed in the MCU.
Terminate
Conference after
Chairperson Exits
Select this option to automatically terminate the
conference once the conference chairperson
disconnects from the conference.
When the check box is cleared, the conference
automatically ends at the predefined end time, or
when all the participants have disconnected from the
conference (if Auto Terminate is selected).
Note: This option is enabled only when an IVR
Service is assigned to the conference and the
Audio+ card is installed in the MCU.
Table 4-6: Conference Properties Advanced Settings - General (Continued)
Option/Field Description