Filter
Top Products
Chapter 5 - Monitoring Conferences
5-64
The following detailed information is displayed in the Channel Info:
Table 5-16: IP Participant Properties - Video In Channel Info
Field/Option Description
MCU Address The IP address of the H.323 card installed in the MCU
to which the participant is connected and the UDP port
number allocated to the participant incoming media
stream on the MCU side.
Party Address The IP address of the participant and the port number
allocated to the media stream on the participant side.
Media Info This table provides field/value information about
currently used video properties and settings.
Algorithm Indicates the audio or video algorithm and protocol.
Frame per
packet (audio
only)
The number of audio frames per packet that are
transferred between the MCU and the endpoint. If the
actual Frame per Packets are higher than Frame per
Packets declared during the capabilities exchange, a
Faulty flag is displayed.
Resolution
(video only)
Indicates the video resolution in use. If the actual
resolution is higher than resolution declared in the
capabilities exchange, the Faulty flag is displayed. For
example, if the declared resolution is CIF and the
actual resolution is 4CIF, the Faulty flag is displayed.
Frame Rate
(video only)
The number of video frames per second that are
transferred between the MCU and the endpoint.
Annexes (video
only)
Indicates the H.263 annexes in use at the time of the
last RTCP report. If the actual annexes used are other
than the declared annexes in the capabilities
exchange, the Faulty flag is displayed.
Channel Index For Polycom Internal use only.