MGC Manager User’s Guide - Volume I
5-47
The following information is displayed in Connection Info2:
Table 5-11: ISDN Participant Properties - Connection Info2
Field/Parameter Description
Connection Time The date and time the participant connected to the
conference.
Note: The time format is derived from the operating
system time format.
Disconnection
Time
The date and time the participant was disconnected
from the conference.
Loopback Status For future version.
Connection
Retries Left
Indicates the number of retries left for the system to
connect the participant to the conference.
Tx Rate The line rate at which data sent from the MCU is
received by the endpoint.
Rx Rate The line rate at which data sent from the endpoint is
received by the MCU.
Mute (By
Operator)
Used to mute the participant’s audio or video
channels by the operator. If checked, the
participant's audio/video channel is muted.
Mute (By
Participant)
If checked, indicates that the audio and/or video
channels have been muted by the participant.
Mute (By MCU) If checked, indicates that the audio and/or video
channels have been muted by the MCU (as in the
Exclusive Speaker mode or in a Lecture Show).
Block Used to block the participant’s audio channel. If
checked, the audio channel is blocked, but the
participant will still be heard by other participants.
Attending Displays the participant or operator status in a Greet
and Guide conference or in a conference with an
IVR Service.
• Oper Participant - This option is checked when
viewing the operator parameters.
• Attending - This option is checked when the
participant is in an Attended state.