Filter
Top Products
MGC Manager User’s Guide - Volume I
5-75
Call
Disconnection
Reason (cont.)
Operator
Disconnect
The operator disconnected the
participant from the conference.
The Cause field displays the name
of the operator who disconnected
the participant.
No Net
Connection
The network channels could not be
connected. This may also be
caused when the communication
lines are unavailable or busy.
Participant hang
up
The participant disconnected from
the conference.
V-Gate No
Response
Applicable in an ATM connection,
when the V-Gate is unable to
negotiate a connection with the
endpoint.
Security Failure An encryption failure occurred.
Bonding Failure The connection could not be
established between the
participant and the MCU when
Bonding is used.
Bad H243
Connection
Problems with the connection
protocol.
Resource
Deficiency
Not enough hardware resources
(MUX, video, audio, data or
network cards) to handle the
participant call.
Gatekeeper
Failure
The participant’s failure to connect
to the conference is caused by the
gatekeeper.
H323 Failure The participant’s failure to connect
to the conference is caused by the
MCU (H.323 card).
Table 5-20: H.323 Participant Properties - Disconnection Causes (Continued)
Pane Name Category and Description