Filter
Top Products
Chapter 6 - Operations Performed During On Going Conferences
6-12
Changing the Properties of a Disconnected Participant
You can change several properties of a defined participant who is
disconnected, for example, before reconnecting that participant.
• Name - Modify the automatically assigned name to the participant’s real
name to correctly display it in the Monitor and Status panes. Participant
name is also included in the CDR file which is used for billing.
• Connection Type - Alter the participant connection from dial-in to dial-
out or vice versa.
• Phone Number or IP address - Change the participant’s dial-in/dial-out
phone number or IP dress as required.
• Interface Type - Change the participant’s interface (and protocol),
provided that the endpoint supports both ISDN and IP.
• VIP status - Change the participant’ status from or to VIP.
• Participant State - Reconnect the participant.
• Mute (By Operator) - Mute or unmute the participant.
• Service Type - Change the name of the network service that the
participant is using to connect
• AGC - disable AGC when required (enabled is the default)
• Recording - change the recording settings from None (no recording) to
Dial-up or vice versa.