Filter
Top Products
MGC Manager User’s Guide - Volume I
5-77
7. Click the Resource Details tab to view the MCU resources allocated to
the participant.
Video
Disconnection
Reason
(Secondary)
(cont.)
Remote device
does not support
the current video
parameters
During the connection to the
conference, the endpoint fails to
adjust (lower) its video settings to
the conference settings. For
example, when the conference
frame rate is set to QCIF, the
endpoint sends video in CIF and
cannot lower the video resolution
to QCIF.
Remote device
failed to change its
video parameters
In a Video Switching conference
with video parameters set to Auto
(activating the highest common
mechanism), when the conference
video parameters are adjusted
according to the participants
currently connected to the
conference, the participant’s
endpoint could not adjust its video
parameters. Consequently, the
connection status changed to
Secondary.
Video stream
violation during
session
The endpoint’s video parameters
exceed the parameters set for the
conference. For example, if the
conference frame rate is set to 15
fps and the endpoint sends video
at 30 fps (frames per second), the
endpoint is connected as
Secondary.
Video channel
rejected due to
inadequate H.323
card resources
The resources of the H.323 card
were insufficient for the
participant’s video channel.
Table 5-20: H.323 Participant Properties - Disconnection Causes (Continued)
Pane Name Category and Description