Filter
Top Products
Chapter 5 - Monitoring Conferences
5-16
Connection
Type
Identifies the defined type of participant's connection to the
conference.
Dial-out The MCU (conference) dials to the
participant.
Dial-in The participant calls the MCU
(conference).
Direct
connection
Leased Line connection (ISDN
only).
Audio Indicates whether the participant's audio is connected and the
status of the audio channel. For details see Table 5-4.
Video Indicates whether the participant’s video channel is connected,
and the status of the video connection. For details see Table 5-5.
Sync. Indicates whether the participant's site is synchronized. For
H.323 participants, indicates the general synchronization status
of Video Switch, Protocol Sync Loss and Video Intra Sync.
• OK - there is no synchronization problem.
• l-sync loss - there is a general synchronization problem with
the MCU.
• r-sync loss - there is a general synchronization problem with
the participant site.
• l-video sync loss - there is a video synchronization problem
with the MCU.
• r-video sync loss - there is a video synchronization problem
with the participant site.
To see the number of times that the sync loss problem occurred
(either in the remote or the local site) see the Sync Loss Cont
and V Sync Loss Count columns.
Tx Rate The line rate in which data sent from the MCU is received by the
endpoint. For H.323 participants indicates the total line rate of all
the channels (agreed rate) in which data sent from the MCU is
received by the endpoint.
Table 5-2: On Going Conference - Monitor Pane Columns (Continued)
Column
Name
Icon Indication Description