Filter
Top Products
Chapter 4 - Setting Up Conferences
4-90
You can add defined participants during an On Going Conference. For more
details, see Chapter 6, “Adding New Participants to a Conference”.
For detailed information about defining an Entry Queue and accessing a
conference via an Entry Queue, see Chapter 8, “Entry Queues, Operator
Conferences, and Attended Conferencing”. For information about defining an
Audio Only Entry Queue, see the MGC Manager User’s Guide, Volume II,
Chapter 5, “Meeting Rooms and Entry Queues”.
Defined H.323 Participants Dial-in
Simple Dial-In Settings (No Gatekeeper)
In simple dial-in, no gatekeeper is required if the participant uses the IP
address of the card to dial-in. The participant is provided with the IP address
of the IP card installed in the MCU. The participant enters this IP address
when dialing to the conference. When connecting, the participant is routed to
the appropriate IP card according to the specified IP address. The system
determines the target conference according to the participant’s IP address
entered during the participant properties definition.
Figure 4-5: H.323 Participant Simple Dial-in (No Gatekeeper)
Endpoint IP:
196.123.38.129
Endpoint IP:
196.123.38.146
Endpoint IP:
196.123.12.89
MCU
LAN
Conference1
MG323
module A
Conference2
MG323
module B
IP:172.22.138.146
IP:172.22.138.148
IP:172.22.138.148
IP:172.22.138.146 IP:172.22.138.146