Filter
Top Products
Chapter 7 - Meet Me per Conferences and Meeting Rooms
7-6
13. Click the Meet Me Per Conf tab.
The Conference Properties - Meet Me Per Conf dialog box opens.
Defining Conference Dial In Numbers
The conference phone numbers may be assigned by the operator or
automatically by the system. When allocated by the system, a single number,
which is derived from the dial-in numbers defined in the ISDN Network
Service, is assigned to the conference. The assigned dial-in number can only
be viewed in the Status or Monitor panes of the Main Window, once the
conference or reservation is saved on the MCU. This number is then given to
all the conference participants to use for connecting to the conference. You
can manually assign a dial-in number to the conference in the Conference
Properties - Meet Me Per Conf dialog box.
If participants in the same conference use different ISDN Network Services,
the conference may be assigned different dial-in numbers for each of the
ISDN Network Services used to connect to the conference. In such a case, use
the manual allocation method.