Filter
Top Products
Chapter 7 - Meet Me per Conferences and Meeting Rooms
7-10
To delete a service name or dial-in number from the conference:
1. In the Conference Properties - Meet Me per Conf dialog box, select the
ISDN/IP Network Service name or dial-in number to delete.
2. Click the associated Minus button.
The service name and dial-in numbers are removed from the conference
definition.
Connecting to a Meet Me Conference
Dial-in participants can be defined or undefined before a conference starts.
Dial-out participants can only be defined. If Auto Detect is selected for the
dial-out participant, you may define the participant’s name and phone number
and the system will automatically detect the participant capabilities and
connect him/her accordingly. Dial-in “undefined” participants may connect to
the conference if “Allow Undefined Participants” is selected in the
Participants tab and if there are available resources. The conference may also
include defined dial-in participants. These participants are identified by their
CLI number (ISDN) or Alias (H.323).
When the Auto Rate Detect option is active for a dial-out participant, the system
automatically detects the participant’s line rate, and connects the participant at
the line rate appropriate to the endpoint, up to the maximum line rate defined in
the conference settings. This option is advantageous when all participants are
connected at the same line rate defined for the conference.