Filter
Top Products
MGC Manager User’s Guide - Volume I
7-11
Figure 7-1: Direct Dial-in (Meet Me Conference)
Dialing Into the Conference in the H.323 Environment
The IP Network Service for H.323 is registered in the gatekeeper using a
prefix. In a Meet Me Conference, a participant must enter the H.323 Service
Prefix followed by the conference numeric ID or conference name (H.323 ID
format) as the dial-in string. For example, if the H.323 Service prefix is 100
and the conference numeric ID is 1234, the dial-in string that is dialed in by
the participant is 1001234. When a participant dials in, the call arrives at the
gatekeeper. The gatekeeper identifies the IP Network Service and tries to
connect to the first free IP card. If the resource is available, the gatekeeper
forwards the string that was dialed by the endpoint to the MCU. According to
the string that was dialed in (the system ignores the prefix), the system
searches for a Meet Me Per Conf - Allow Undefined Participants conference
with this numeric ID. If such a conference exists, the system connects the
participant to the appropriate conference. If no such conference exists, the call
is rejected.
ISDN
Conference1
Dial-in Number 9251222
Conference2
Dial-in Number 925122
3
9
2
5
1
2
2
2
9251222
9
2
5
1
2
2
3