Filter
Top Products
MGC Manager User’s Guide - Volume I
5-69
Tx Rate The total line rate of all the channels (agreed rate) in
which data sent from the MCU is received by the
endpoint.
Rx Rate The total line rate of all the channels (agreed rate) in
which data sent from the endpoint is received by the
MCU.
Mute (By
Operator)
Used to mute the participant’s audio or video
channels by the operator during the conference. If
checked, the participant's audio/video channel is
muted. To mute the participant, click this check box.
Mute (By
Participant)
Indicates the channels (Audio and Video) that have
been muted by the participant.
Mute (By MCU) Indicates the channels (Audio and Video) that have
been muted by the MCU. This is applicable in
Exclusive Speaker mode and Lecture Show.
Block To block the audio transmission to the participant
site. Clearing this check box will restore the audio
transmission to this site.
Attending Displays the participant or operator status in a Greet
& Guide conference or in an IVR enabled
conference.
Oper Participant – This option is checked when
viewing the operator parameters.
Attending – This option is checked when the
participant is in a Attended state.
Participant
Attending State
Displays the status of the Attended participant:
Attended – The participant is being assisted by the
operator (in the Operator conference)
On Hold – The participant was placed on hold and
hears background music. In video conferences the
participant also views the Welcome slide.
Table 5-17: Connection Info2 parameter description
Field Description