Filter
Top Products
MGC Manager User’s Guide - Volume I
5-15
Connection
(cont.)
Partial
connection
The connection process is not yet
complete; the video channel has
not been connected.
Faulty
Connection
The participant is connected, but
problems occurred in the
connection, such as
synchronization loss.
Secondary
Connection
The participant is connected
without video (audio only). This
status occurs when the
participant's endpoint does not
support the video parameters
required by the conference.
Noisy Line The line of this participant was
detected by the system as noisy.
Note: This indicator is used only
when the automatic noisy line
detection option was enabled in
the “system.cfg”.
Participant
Numbers\
IP Address\
SIP Address
Displays the participant and MCU phone numbers or IP address/
alias, depending on the supported network and connection type.
In dial-in connection, displays the CLI number (ISDN) or IP
address/alias of the participant calling the MCU (marked by the
letter P) and the MCU number or IP address/alias dialed by the
participant (marked by the letter M). In dial-out connection
displays the dialed number (ISDN) or IP address/alias (H.323) of
the participant.
Table 5-2: On Going Conference - Monitor Pane Columns (Continued)
Column
Name
Icon Indication Description