Filter
Top Products
Chapter 4 - Setting Up Conferences
4-104
Participant
Numbers
This parameter is enabled for the Dial-out connection
type, or when the Dial-in Meet Me Per Conference -
MCU option is selected.
Type the participant’s number (including country and
area codes when required) to be dialed by the
operator when connecting the participant to the
conference. Add a semicolon (;) between numbers
when several numbers are to be assigned to a
participant (one for each channel). For example,
9251222; 9251223; ….;9251xxx (in aggregation
mode).
If the Meet Me Per MCU option is enabled, the CLI
number is used to identify the participant and route
them to the appropriate conference. Enter the
participant’s CLI number.
Note: In order to support Bonding with specific
telecommunication switches, the pound key (#)
symbol needs to be added to the Dial-out number
sequence.
MCU Numbers (Available only for the Dial-in connection)
Enter the MCU number as allocated to the MCU by
the carrier. The dial-in numbers are defined in the
ISDN Network Services - Span dialog box. Add a
semicolon (;) between numbers when several
numbers are to be assigned to the MCU.
If left blank, when the conference starts the MCU
automatically assigns a dial-in number from the list of
numbers defined in the ISDN Network Service.
Note: During an On Going Conference, the MCU
numbers are listed in the Network+Phone/IP column
of the main window Status pane. The format (number
of digits) depends on how the dial-in numbers are
forwarded from the PBX switch to the MCU, if the
PBX truncates part of the number.
Extension/
Identifier String
Used with a Prairie external recording system in
recording-enabled conferences. For a description of
recording options and setup, see the MGC Manager
User’s Guide, VoicePlus Edition, Chapter 8,
Recording”.
Table 4-15: ISDN/ATM/MPI/T1-CAS Participant - Identification (Continued)
Field/Option Description