Filter
Top Products
Chapter 5 - Monitoring Conferences
5-54
The following information is displayed:
Table 5-14: Disconnection Cause parameters
Cause Description
Call Disconnection
Reason
Operator Disconnect - The operator disconnected
the participant from the conference. The Cause field
displays the name of the operator who disconnected
the participant.
No Net Connection - The network channels could
not be connected. This may also be caused when
the communication lines are unavailable or busy.
Participant hang up - The participant disconnected
from the conference.
V-Gate No Response - Applicable in an ATM
connection, when the V-Gate is unable to negotiate
a connection with the endpoint.
Security Failure - An encryption failure occurred.
Bonding Failure - The connection could not be
established between the participant and the MCU
when Bonding is used.
Bad H243 Connection - Problems with the
connection protocol.
Resource Deficiency - Not enough hardware
resources (MUX, video, audio, data or network
cards) to handle the participant call.
Cause If there is a problem in the connection, which is
indicated by one of the call disconnection reasons,
the system displays an explanation for this problem.
For example, the No Net Connection disconnection
reason may be selected, while the disconnection
explanation called party line is busy appears in the
Cause field.
For a detailed description of disconnection causes
and parameters, see Appendix A.