Filter
Top Products
MGC Manager User’s Guide - Volume I
4-105
Meet me per (Available only for the Dial-in connection)
Select:
• Party - The participant dials a single number for
each group of channels in use.
• Channel - The participant dials a different
number for each channel.
• MCU-Conference - A single dial-in number (DID)
is assigned to all the conferences running on a
certain MCU. The MCU phone number is entered
in the Network Service – Span and Phones
dialog box. The participants are routed to the
appropriate conferences according to their phone
numbers (CLI) that are entered in the Participant
Numbers box. When a participant dials in using
the MCU number, the MCU identifies the
participant phone number and routes the
participant to the appropriate conference. This
option should be used only with PBXs supporting
the CLI (Caller ID) option.
Bonding Phone
Number
(Available only for the Dial-out connection type, and
should be used only if Bonding is the selected
Aggregation method for the participant.)
Enter a single number for all the aggregated
channels. The system automatically assigns the
appropriate numbers to the remaining channels.
With some switches, Bonding is supported only
when the pound key (#) symbol is added to the Dial-
out number sequence.
If left blank, the MCU automatically assigns the first
number that appears in the Participant Phone
Number box as the bonding number when the
conference starts.
Table 4-15: ISDN/ATM/MPI/T1-CAS Participant - Identification (Continued)
Field/Option Description