Filter
Top Products
Chapter 6 - Operations Performed During On Going Conferences
6-54
Muting Dial-In Participants Upon Connection
You can set a conference to automatically mute all dial-in participants that
were not defined prior to or during the On Going Conference. This feature,
referred to as the Mute “Meet Me” Parties feature, can be enabled during
conference scheduling or during the On Going Conference.
During an On Going Conference this feature can be enabled or cancelled in
one of the following methods:
• From the conference right-click menu
• From the Conference Properties dialog box
• From the chairperson DTMF input device (remote control/telephone),
pressing the appropriate DTMF code (default code for enabling this
feature is *86 and for cancelling it #86)
To enable Mute ‘Meet Me’ Parties from the Conference right-click
menu:
1. Expand the On Going Conferences list.
2. Right-click the icon of the conference whose dial-in participants
connecting to the conference are to be muted, and then click
Mute ‘Meet Me’ Parties.
This option is applicable to undefined participants connecting to a Meeting Room,
Meet Me per Conference or Entry Queue Access conference.
This feature does not apply to standard pre-defined dial-in participants.