Filter
Top Products
MGC Manager User’s Guide - Volume I
7-9
To manually assign H.323 Service Prefixes to the conference:
H.323 dial-in participants can dial into Meet Me Conferences by simply
dialing the H.323 Prefix (from the IP Network Service) and the conference
Numeric ID or the conference name. For more information, see “Dialing Into
the Conference in the H.323 Environment” on page 7-11.
1. In the Conference Properties - Meet Me per Conf dialog box, in the Meet
Me Service - H.323 Service pane, click the Plus button. The H.323
Service dialog box opens.
2. Define the dial-in H.323 Service Prefix to be assigned to the conference
as follows:
3. Click OK. The H.323 Service Prefix is added to the table in the Meet Me
Service - H.323 Service pane.
4. If participants use more than one IP Network Service to connect to the
conference, repeat steps 1 to 3 to define H.323 Service Prefixes for these
additional IP Network Services.
5. In the Conference Properties dialog box, click OK to complete the
conference definition.
Table 7-2: H.323 Network Service Options
Option Description
H.323 Network
Service Name
Enter the name of the IP Network Service to be used
by participants to connect to the Conference exactly as
it is defined in the IP Network Services list (the system
is case sensitive).
H323 Service
Prefix
Enter the H.323 prefix (from the IP Network Service) to
be assigned to the conference. This number must be
defined in the H323 dialog box of the selected IP
Network Service.