Filter
Top Products
Chapter 4 - Setting Up Conferences
4-120
3. Define the following parameters:
Table 4-18: IP Participant Properties - Advanced
Field/Option Description
Video Bit Rate
Kbits/sec
This option is enabled when the Auto Video Bit
Rate check box is cleared. It allows you to specify
the participant’s video transfer rate. When adding a
new participant during an On Going Conference this
option defaults to the conference setting.
Note: It is recommended to use the multiples of 100
bits per second.
Auto Video Bit
Rate
Select this check box to use the Line Rate defined
for the conference, or clear it to define the video rate
for the participant. This check box is automatically
selected (and cannot be cleared) when defining a
new participant during an On Going Conference.
Service Name Enter the name of the IP Network Service handling
the call. Note that the system is case sensitive. If left
blank, the default IP Network Service (H.323 or SIP
depending on the Interface Type) is used.