Filter
Top Products
SONET/SDH | 1015
SONET MIB
Table 49-3 lists the managed objects supported in the SONET MIB, as defined in RFC 2558.
SONET Traps
Table 49-4 describes SONET traps supported in the Force10-specific MIB.
Table 49-3. SONET MIB: Managed Objects
SONET Managed Object Description
sonetMediumType Sonet or SDH depending on the configuration
sonetMediumTimeElapsed Time in seconds (up to 900 seconds) since the line card is up. Resets after 900
seconds has elapsed
sonetMediumValidIntervals The number of previous intervals for which valid data has been stored.
sonetMediumLineCoding This variable describes the line coding for this interface—Non-Return to Zero
(NRZ).
sonetMediumCircuitIdentifier This variable contains the transmission vendor's circuit identifier to facilitate
troubleshooting. Note that the circuit identifier, if available, is also represented
by ifPhysAddress.
sonetMediumInvalidIntervals Displays seconds in current 15 minute intervals when data could not be
collected.
sonetMediumLoopbackConfig Displays if loopback is line or internal
sonetSESthresholdSet Displays which recognized set of SES thresholds is supported.
Table 49-4. SONET Traps and OIDs
Trap OID Trap Object
SONET_S_LOS
Section Loss of Signal
1.3.6.1.4.1.6027.3.3.2.2.0.1 alarm state (1.3.6.1.4.1.6027.3.3.1.2.1.1.3),
alarm type(1.3.6.1.4.1.6027.3.3.1.2.1.1.2),
ifindex(1.3.6.1.4.1.6027.3.3.1.2.1.1.4),
slot(1.3.6.1.4.1.6027.3.3.1.2.1.1.5),
port(1.3.6.1.4.1.6027.3.3.1.2.1.1.6)
SONET_S_LOF
Section Loss of Frame
1.3.6.1.4.1.6027.3.3.2.2.0.2 alarm state (1.3.6.1.4.1.6027.3.3.1.2.1.1.3),
alarm type(1.3.6.1.4.1.6027.3.3.1.2.1.1.2),
ifindex(1.3.6.1.4.1.6027.3.3.1.2.1.1.4),
slot(1.3.6.1.4.1.6027.3.3.1.2.1.1.5),
port(1.3.6.1.4.1.6027.3.3.1.2.1.1.6)
SONET_L_AIS
Line Alarm Indication Signal
1.3.6.1.4.1.6027.3.3.2.2.0.9 alarm state (1.3.6.1.4.1.6027.3.3.1.2.1.1.3),
alarm type(1.3.6.1.4.1.6027.3.3.1.2.1.1.2),
ifindex(1.3.6.1.4.1.6027.3.3.1.2.1.1.4),
slot(1.3.6.1.4.1.6027.3.3.1.2.1.1.5),
port(1.3.6.1.4.1.6027.3.3.1.2.1.1.6