Filter
Top Products
1030 | Stacking S-Series Switches
www.dell.com | support.dell.com
To manually assign a new unit a position in the stack:
Figure 50-12. Adding a Stack Unit with a Conflicting Stack Number—Before
Step Task Command Syntax Command Mode
1 While the unit is unpowered, install stacking modules in the new unit.
2 On the stack, determine the next available stack-unit
number, and the management prioritity of the
management unit.
show system brief
show system stack-unit
EXEC Privilege
3 Create a virtual unit and assign it the next available
stack-unit number.
stack-unit provision
CONFIGURATION
4 On the new unit, number it the next available stack-unit
number.
stack-unit renumber
EXEC Privilege
5 (OPTIONAL) On the new unit, assign a management
priority based on whether you want the new unit to be
the stack manager.
stack-unit priority
CONFIGURATION
6 Connect the new unit to the stack using stacking cables.
------------------------STANDALONE BEFORE CONNECTION----------------------------------
Standalone#show system brief
Stack MAC : 00:01:e8:d5:ef:81
-- Stack Info --
Unit UnitType Status ReqTyp CurTyp Version Ports
---------------------------------------------------------------------------
0 Member not present S50V
1 Management online S50V S50V 7.8.1.0 52
2 Member not present
3 Member not present
4 Member not present
5 Member not present
6 Member not present
7 Member not present
[output omitted]
-----------------------------STACK BEFORE CONNECTION----------------------------------
Stack#show system brief
Stack MAC : 00:01:e8:d5:f9:6f
-- Stack Info --
Unit UnitType Status ReqTyp CurTyp Version Ports
---------------------------------------------------------------------------
0 Member not present
1 Management online S50N S50N 7.8.1.0 52
2 Standby online S50V S50V 7.8.1.0 52
3 Member not present
4 Member not present
5 Member not present
6 Member not present
7 Member not present
[output omitted]