Filter
Top Products
502 | IPv6 Addressing
www.dell.com | support.dell.com
Figure 22-6. Command Example: show ipv6 interface
Show IPv6 Routes
View the global IPv6 routing information with the following command.
Command Syntax Command Mode Purpose
show ipv6 route type EXEC Show IPv6 routing information for the specified
route type.
Enter the keyword:
• To display information about a network, enter
the ipv6 address (X:X:X:X::X).
• To display information about a host, enter the
hostname.
• To display information about all IPv6 routes
(including non-active routes), enter all.
• To display information about all connected IPv6
routes, enter connected.
• To display information about brief summary of
all IPv6 routes, enter summary.
• To display information about Border Gateway
Protocol (BGP) routes, enter bgp.
• To display information about ISO IS-IS routes,
enter isis.
• To display information about Open Shortest Path
First (OSPF) routes, enter ospf.
• To display information about Routing
Information Protocol (RIP), enter rip.
• To display information about static
IPv6 routes, enter static.
• To display information about an IPv6 Prefix
lists, enter list and the prefix-list name.
FTOS#show ipv6 interface gi 2/2
GigabitEthernet 2/2 is down, line protocol is down
IPV6 is enabled
Link Local address: fe80::201:e8ff:fe06:95a3
Global Unicast address(es):
3:4:5:6::8, subnet is 3::/24
Global Anycast address(es):
Joined Group address(es):
ff02::1
ff02::2
ff02::1:ff00:8
ff02::1:ff06:95a3
MTU is 1500
ICMP redirects are not sent
DAD is enabled, number of DAD attempts: 1
ND reachable time is 30 seconds
ND advertised reachable time is 30 seconds
ND advertised retransmit interval is 30 seconds
ND router advertisements are sent every 200 seconds
ND router advertisements live for 1800 seconds