Filter
Top Products
System Management | 61
Apply a Privilege Level to a Username
To set a privilege level for a user:
Apply a Privilege Level to a Terminal Line
To set a privilege level for a terminal line:
Configure Logging
FTOS tracks changes in the system using event and error messages. By default, FTOS logs these messages
on:
• the internal buffer
• console and terminal lines, and
• any configured syslog servers
Disable Logging
To disable logging:
Task Command Syntax Command Mode
Configure a privilege level for a user.
username username privilege level
CONFIGURATION
Task Command Syntax Command Mode
Configure a privilege level for a terminal line.
privilege level level
LINE
Note: When you assign a privilege level between 2 and 15, access to the system begins at EXEC mode,
but the prompt is hostname#, rather than hostname>.
Task Command Syntax Command Mode
Disable all logging except on the console.
no logging on
CONFIGURATION
Disable logging to the logging buffer.
no logging buffer
CONFIGURATION
Disable logging to terminal lines.
no logging monitor
CONFIGURATION
Disable console logging.
no logging console
CONFIGURATION