Filter
Top Products
IPv6 Addressing | 501
Show an IPv6 Interface
View the IPv6 configuration for a specific interface with the following command.
Figure 22-6 illustrates the
show ipv6 interface command output.
FTOS#show ipv6 ?
accounting IPv6 accounting information
cam linecard IPv6 CAM Entries for Line Card
fib linecard IPv6 FIB Entries for Line Card
interface IPv6 interface information
mbgproutes MBGP routing table
mld MLD information
mroute IPv6 multicast-routing table
neighbors IPv6 neighbor information
ospf OSPF information
pim PIM V6 information
prefix-list List IPv6 prefix lists
route IPv6 routing information
rpf RPF table
FTOS#
Command Syntax Command Mode Purpose
show ipv6 interface type {slot/
port}
EXEC Show the currently running configuration for the
specified interface
Enter the keyword interface followed by the type of
interface and slot/port information:
• For all brief summary of IPv6 status and
configuration , enter the keyword brief.
• For all IPv6 configured interfaces, enter the
keyword configured.
• For a 10/100/1000 Ethernet interface, enter the
keyword GigabitEthernet followed by the slot/
port information.
• For a Gigabit Ethernet interface, enter the
keyword GigabitEthernet followed by the slot/
port information.
• For a 10 Gigabit Ethernet interface, enter the
keyword TenGigabitEthernet followed by the
slot/port information.
• For a loopback interface, enter the keyword
loopback followed by the loopback number
• For a linecard interface, enter the keyword
linecard followed by the slot number
• For a port-channel interface, enter the keyword
port-channel followed by the port-channel
number
• For a VLAN interface, enter the keyword vlan
followed by the VLAN ID
Command Syntax Command Mode Purpose